Binding Draco (DSMX)

Binding Draco will require some understanding of your Chosen Transmitter - This guide will look at the binding process of DSMX (Spektrum Transmitters). The following list of transmitters are known to work with Draco and are recommended.

  • Spektrum DX6
  • Spektrum DX6e
  • TBS Tango
  • Taranis with Orange Module


Please review the following video on the binding process for Draco.

 



Changes required on your Transmitter (DX6 and DX6e)

To get Draco to perform as expected, you may be required to make some changes on your transmitter.

Ensure you've created a new model on the transmitter which is designated as a Quadcopter

On the DX6 and DX6e, you will need to go into the transmitter settings - Servo Set-up. Adjust the "throw inputs to 147. As stock they are set to 100.

Additionally, you will need to invert the Yaw and Aileron inputs under the model properties.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.